Try CompTIA N10-006 Exam Questions – (Jan-2018 Dumps)

Due to rapidly growing in IT industry the CompTIA N10-006 exam is very important for your professional life. You can pass CompTIA N10-006 exam easily with RealExamDumps’s latest N10-006 exam questions. We at RealExamDumps provide you latest N10-006 exam questions that are going to be asked in the exam so if you prepare and practice the same N10-006 questions beforehand it would be easier for you to answer them in the real exam. When you will become N10-006 exam certified then you will exel in Work with a variety of hardware software and networks. All CompTIA N10-006 exam questions prepared by the subject matter experts who are professional in their respective fields.

♥♥ 2018 NEW RECOMMEND N10-006 Exam Questions ♥♥

N10-006 exam questions, N10-006 PDF dumps; N10-006 exam dumps:: https://www.dumpsschool.com/N10-006-exam-dumps.html (461 Q&A) (New Questions Are 100% Available! Also Free Practice Test Software!)

Latest and Most Accurate CompTIA N10-006 Dumps Exam Questions and Answers:

Version: 15.0
Question: 21

An F-connector is used on which of the following types of cabling?

A. CAT3
B. Single mode fiber
C. CAT5
D. RG6

Answer: D

Explanation:
An F connector is a coaxial RF connector commonly used for terrestrial television, cable television and universally forsatellite television and cable modems, usually with RG-6/U cable or, in older installations, with RG-59/U cable.

Question: 22

A network technician must utilize multimode fiber to uplink a new networking device. Which of the following Ethernet standards could the technician utilize? (Select TWO).

A. 1000Base-LR
B. 1000Base-SR
C. 1000Base-T
D. 10GBase-LR
E. 10GBase-SR
F. 10GBase-T

Answer: B,E

Explanation:
1000BASE-SX is a fiber optic Gigabit Ethernet standard for operation over multi-mode fiberwith a distance capability between 220 meters and 550 meters.
10Gbase-SR is a 10 Gigabit Ethernet LAN standard for operation over multi-mode fiber optic cable and short wavelength signaling.

Question: 23

Which of the following network devices use ACLs to prevent unauthorized access into company systems?

A. IDS
B. Firewall
C. Content filter
D. Load balancer

Answer: B

Explanation:
A firewall is a system designed to prevent unauthorized access to or from a private network. Firewalls arefrequently used to prevent unauthorized Internet users from accessing privatenetworks connected to the Internet, especially intranets. Firewalls use ACLs (access control lists) to determine which traffic is allowed through the firewall. All traffic entering or leaving the intranet passes through the firewall, which examines each message and blocks or allows the message depending on rules specified in the ACL. The rules in the ACL specify which combinations of source IP address, destination address in IP port numbers are allowed.

Question: 24

Which of the following is used to define how much bandwidth can be used by various protocols on the network?

A. Traffic shaping
B. High availability
C. Load balancing
D. Fault tolerance

Answer: A

Explanation:
If a network connection becomes saturated to the point where there is a significant level of contention, network latency can rise substantially.
Traffic shaping is used to control the bandwidth used by network traffic. In a corporate environment, business-related traffic may be given priority over other traffic. Traffic can be prioritized based on the ports used by the application sending the traffic. Delayed traffic is stored in a buffer until the higher priority traffic has been sent.

Question: 25

Which of the following is used to authenticate remote workers who connect from offsite? (Select TWO).

A. OSPF
B. VTP trunking
C. Virtual PBX
D. RADIUS
E. 802.1x

Answer: D,E

Explanation:
D: A RADIUS (Remote Authentication Dial-in User Service)server is a server with a database of user accounts and passwords used as a central authentication database for users requiring network access. RADIUS servers are commonly used by ISP’s to authenticate their customer’s Internet connections.
Remote users connect to one or more Remote Access Servers. The remote access servers then forward the authentication requests to the central RADIUS server.
E: 802.1X is an IEEE Standard for Port-based Network Access Control (PNAC). It provides an authentication mechanism to devices wishing to attach to a network.
802.1X authentication involves three parties: a supplicant, an authenticator, and an authentication server. The supplicant is a client that wishes to attach to the network. The authenticator is a network device,such as an Ethernet switch, wireless access point or in this case, a remote access server and the authentication server is the RADIUS server.

Question: 26

Which of the following provides accounting, authorization, and authentication via a centralized privileged database, as well as, challenge/response and password encryption?

A. Multifactor authentication
B. ISAKMP
C. TACACS+
D. Network access control

Answer: C

Explanation:
TACACS+ (Terminal Access Controller Access-Control System Plus) is aprotocol that handles authentication, authorization, and accounting (AAA) services. Similar to RADIUS, TACACS+ is a centralized authentication solution used to provide access to network resources. TACACS+ separates the authentication, authorization, and accounting services enabling you to host each service on a separate server if required.

New Updated N10-006 Exam Questions N10-006 PDF dumps N10-006 practice exam dumps: https://www.dumpsschool.com/N10-006-exam-dumps.html

Facebook Comments